Bolt Washer



Bolt Washer
im building a chevy truck and am wondering were i could buy the hard were for a 3 bolt steering knuckle ?

im building a 1987 chevy truck and am putting in a 4 inch lift kit but my buddy says i need a 3 bolt steering knuckle i bought the knuckle and know i want to know were i can get the hard ware to install i guess it needs bolt and washers he says hard ware for the knuckle will cost me 100 bucks its called conical washers ? any ideas ?

Any tricked out 4 wheel drive magazine will tell you where to get all you need.

Noisy Front Load Washer – Remove Shipping Bolt


BOLT ON J THERMOCOUPLE 12IN


BOLT ON J THERMOCOUPLE 12IN


$10.00


Bolt-On Washer Thermocouple Assemblies New rugged design; for #6, #8, #10 and 1/4” screw sizes. Made from 20 AWG glass-on-glass or PTFE insulatd special limits of error wire. Stocked in 12, 24, 36 and 60” lengths with stripped end leads in J, K, T and E calibrations. Rated to 900F. Washer dimensions: #6 and #8 screw size: 0.88”L x 0.250”W; #10 and 1/4” screw size: 1”L x 0.360”W….

BOLT ON K THERMOCOUPLE 12IN


BOLT ON K THERMOCOUPLE 12IN


$10.00


Bolt-On Washer Thermocouple Assemblies New rugged design; for #6, #8, #10 and 1/4” screw sizes. Made from 20 AWG glass-on-glass or PTFE insulatd special limits of error wire. Stocked in 12, 24, 36 and 60” lengths with stripped end leads in J, K, T and E calibrations. Rated to 900F. Washer dimensions: #6 and #8 screw size: 0.88”L x 0.250”W; #10 and 1/4” screw size: 1”L x 0.360”W….

Korky 2021BP G-Max Flapper For TOTO Toilet Repairs


Korky 2021BP G-Max Flapper For TOTO Toilet Repairs


$7.38


LAVELLE INDUSTRIES INC #2021BP Gmax Replacement Toilet Flapper, 3″ Sealing Surface For Larger Toto Flush Valves, Made Of Premium Red Chlorazone Material Which Resists Chlorine, Made In USA….

Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack)


Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack)


$19.00


Kreg’s self-tapping screws were designed for its famous pocket-hole joinery, but that’s not all they’re good for. Kreg’s self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides …

American Standard 5311.012.020 Laurel Elongated Toilet Seat with Cover, White


American Standard 5311.012.020 Laurel Elongated Toilet Seat with Cover, White


$20.50


Color/Finish:White, Configuration:Elongated Seat Molded wood seat and cover complete with bolts, nuts and dual-faced adhesive washers…

CLEAR Sunglass Eyeglass Repair Kit DELUXE set


CLEAR Sunglass Eyeglass Repair Kit DELUXE set



This handy kit has nose pads, assorted screws and unique screwdriver – both phillips head and flat head styles needed to complete your repair. A necessary item for any household with glasses! Comes in plastic case (color of case may vary). Contents may shift during shipment.
PLEASE NOTE: kit features many screws with out slots -plain round heads that fit in the end of the screwdriver so no matchin…


Emergency DIY Sunglasses Glasses Repair Kit


Emergency DIY Sunglasses Glasses Repair Kit


$4.50


Amazing all in in one DIY emergency eyeglass repair kit….

Handi-Man Scr Ovstph 14X2-1/2 Md.# B-648A


Handi-Man Scr Ovstph 14X2-1/2 Md.# B-648A


$66.50


SELF-TAPPING SCREWS PHILLIPS OVAL HEADStainless steel. Pack of 100….

BePuzzled Hanayama Cast Metal Brainteaser Puzzles - Hanayama Nutcase Puzzle (Level 6)


BePuzzled Hanayama Cast Metal Brainteaser Puzzles – Hanayama Nutcase Puzzle (Level 6)


$9.79


The nuts and bolts appearance may lull you into believing this to be a straightforward puzzle, but it is a total brain drain. Inventor Oskar van Deventer presents two challenges: 1) remove the small nuts by disassembling the nutcase, and 2) change the order of the wording on the bolts from nut-case to case-nut….

182mm ID Orion Telescope Tube Rings


182mm ID Orion Telescope Tube Rings


$44.99


These cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4″-20 piggyback camera adapter on it, the other has a threaded 1/4″-20 hole. Sold in sets of two rings. Mounting bolts and washers are included. Inside diameter…