Detach Top
Detach top of my laptop to create a computer?
I want to remove the top of my laptop screen and leave the keyboard and mouse. I want to attach that to a monitor but i dont know if i should cut the wires in my laptop. I tried once and the computer turned off. I dont know if the wire was the problem and i dont know what to do. Please help me!
Removing a DC jack from a laptop computer can be accomplished in about an hour. Occasionally, the solder joint holding the jack to the motherboard cracks or wears out, breaking the connection. When this occurs, you must remove the DC jack to repair the damaged part. Remove the jack yourself to save the time and expense of calling a computer technician.
1. Unplug the computer’s power cord from the electrical outlet. Remove the power supply cord from the back of the laptop.
2. Remove the battery pack from the back of the laptop by lifting it out. Locate the cover at the top of the keyboard and slide a flat-head screwdriver underneath one side of it.
3. Detach and remove the keyboard cover. Unfasten the two screws underneath the cover with a Phillips screwdriver and remove them.
4. Take the keyboard out of the laptop. Flip it over and place it on the palm rest. Detach the cable connected to the keyboard and move the keyboard aside.
5. Turn the laptop over. Remove the screws from the back of the computer and put them in a safe place. Remove the cover plates and and set them aside.
6. Detach the video-cable connector from the motherboard. Unplug the wireless card antenna cable. Turn the laptop over and locate the eight screws on the front bezel of the display under the rubber seals.
7. Remove the screws on the front bezel and separate the bezel from the display. Set the bezel out of the way. Unfasten the four screws on the sides of the display panel.
8. Remove the LED display screen from the cover. Unfasten the video cable from the back of the screen. Unplug the cable from the inverter board and set the screen aside.
9. Turn the laptop over so the bottom is facing you. Remove the hard drive from the left side of the laptop. Remove the memory module and wireless card from the center of the computer, lifting them out by hand.
10. Slide out the CD/DVD drive from the right side of the laptop. Detach the heat-sink fan from the upper right side by unfastening the four screws holding it in place and lifting it out.
11. Set the laptop right-side up. Unfasten the screws holding the top pad to the case. Lift the pad out of the computer and unfasten the five screws holding the motherboard in place.
12. Detach the speaker cable from the motherboard and remove the motherboard. Locate the DC jack on the motherboard and use a soldering iron to soften the solder connecting the jack to the motherboard.
13. Remove the DC jack from the motherboard once the solder is soft enough for it to be removed.
HP Pavilion dv6135 Remove / Replace LCD LED Screen
|
|
Cuisinart CSB-77 Smart Stick Hand Blender with Whisk and Chopper Attachments $46.99 Grab this amazingly versatile kitchen tool and the power to mix, whisk and chop will be in the palm of your hand. Housed in handsome brushed stainless steel, this compact hand blender features a powerful 200-watt motor and three separate attachments that quickly and easily create smooth soups, whipped creams, purees and much more. Simple one-handed operation with push-button control and an ergonom… |
|
|
Vacu Vin Pineapple Slicer $5.99 Fresh-cut pineapple is like a little taste of paradise–and if hacking up the whole spiky shebang weren’t such a royal pain, we’d probably all eat a lot more of it. Vacu Vin’s award-winning slicer takes the work and mess out of this tropical treat, peeling, coring, and slicing an entire pineapple in just 30 seconds. Equipped with a medium blade to fit most sizes of fruit, it works just like a cork… |
|
|
DeLonghi EMK6 Electric Moka Espresso Maker – Gray Absolutely stunning in design, the Electric Moka Espresso Maker brings authentic Italian espresso to your counter top. Simply fill the boiler with water, add the filter with ground coffee and the carafe will be filled with hot, fresh espresso within minutes. Watch as the coffee brews through the transparent container. Brews 3 to 6 cups (1.5 oz. cups). Simple On/Off switch and indicator light. Auto… |
|
|
SABRE RED Compact Pepper Spray with Quick Release Key Ring $4.45 Cool style and hot protection are combined in SABRE’s most popular key chain design. This sleek; compact pepper spray delivers a strong balistic stream to reduce wind blow back. Providing extremely practical protection; SABRE permits distance from your threat with its ten (10) foot range; and its quick release key ring and attachment clip ensure its accessible when needed! Protect yourself and you… |
|
|
Ridgid WD1670 16 Gallon Wet/Dry Vacuum with Detachable Blower $177.49 Ridgid 31683 VAC, WD1670 16GAL DETACH 6.5PHP… |
|
|
Foxy Synthetic Hairpiece by easihair The Foxy hairpiece by Jon Renau easihair is a ponytail attachment featuring wonderful curly, long hair. This beautifully long ponytail hairpiece features a 2-in-1 clip-on and fusion attachment. It can be attached to your hair quickly and easily by either the claw clip or the innovative Fusion bun base + drawstring attachment. To use the claw clip, simply open the top of the claw comb and clip over… |
|
|
Ballistics $29.99 This software is BRAND NEW. Packaging may differ slightly from the stock photo above. Please click on our logo above to see over 15,000 titles in stock…. |
|
|
Garmin Portable Friction Mount $17.66 Keep your nüvi in place with this portable friction mount. It’ll keep everything in plain sight when you need it and out of the way when you don’t. Place the mount on any stable surface, and adjust the position of your GPS to your liking. The friction mount weighs enough to keep your device put on the dash, even when sudden maneuvers are necessary. It’s ideal for states in which the use of wind… |
|
|
Manfrotto 498RC2 Ball Head with Quick Release Replaces Manfrotto 488RC2 $103.68 The Manfrotto 496 Compact Ball Head with RC2 Quick Release Plate is constructed of die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras. It has a single repositionable locking lever for 360 degree panoramic rotation and… |
|
|
NcStar Mark III Tactical P4 Sniper 3-9X42/Scope Adaptor Mount/Red Dot Combo Package (STP3942G/D) $199.00 Built using the Ultimate Sighting System (USS), the Mark III Tactical P4 3-9×42 scope combines the benefits of a Mark III tactical scope with the advantage of a backup red dot sight. The system is equipped with a Mark III tactical scope and a specially designed MRD34 ring. The ring, which mounts directly to the ocular lens housing with a built-in Weaver-style platform, stabilizes the DDAB red dot … |