Frame Combat

Smell/Odor from door frame?
We sanded down years and years (old house, perhaps built in the 30s or 40s…maybe older) of paint (maybe 10 layers) down to the original wood on a bathroom door and also the woodwork on the door frame to this bathroom door. Doing so removed the paint that caused the space on the wood frame to breathe again. We painted a fresh coat on the door frame molding, but once it dried, we noticed an ammonia/pee smell coming from the area that can now “breathe.” Any suggestions on how to combat this smell? It’s pretty strong.
I should note that I do not want to use a product that will ruin/remove the paint. Also, it’s a rental, so we can’t just remove the frame to check it out….I’m too scared to anyway.
There are a few possibilities I can think of.
The most obvious thing would be the paint itself. Some paints contain a certain amount of ammonia and will smell a bit until the paint is fully cured. The smell can be noticeable for about a week, should be completely gone in 3 weeks or so. Since this is a small area, perhaps you notice it more because there is not as much air moving about.
The second possibility is that the frame was at one time soaked with urine. Not a happy thought, but could be. Shellac will seal any odor into a surface. Perhaps one of those layers of paint was really shellac? This property of shellac has been known for many years, so it could have been done as a solution to the problem. If this is the case, a new coat of shellac followed by another coat of paint should take care of it. Pigmented shellac would be best, BIN by Zinser is an example. Oil based stain block products (Kilz) do not work as well for this application.
Also, if it is some kind of urine smell the pet odor removers will not work without the added work of removing the paint you just put on.
And yes, latex paints do commonly contain ammonia. It is necessary to stabilize the ph of the paint. Without a stabilizer, the latex component causes the paint to become acidic over a period of time and develop clumps like cottage cheese.
Dragon Age 2 Destiny | combat walkthrough – trailer (2011)
|
|
Delkin DDCF700-32GB 32GB CF 700X Memory Card $161.99 The Delkin 32GB CF 700X memory card is designed to excel in DSLR cameras and advanced camcorders that require faster speeds and performance. With capabilities to write data at speeds over 67MB/s, the CF 700X series supports slow motion recording for professional film-making and promises not to drop frames or slow your cameras buffer, even in the most demanding shooting or recording scenarios. Unli… |
|
|
Delkin DDCF700-64GB 64GB CF 700X Memory Card $383.99 The Delkin 64GB CF 700X memory card is designed to excel in DSLR cameras and advanced camcorders that require faster speeds and performance. With capabilities to write data at speeds over 67MB/s, the CF 700X series supports slow motion recording for professional film-making and promises not to drop frames or slow your cameras buffer, even in the most demanding shooting or recording scenarios. Unli… |
|
|
Delkin DDCF700-16GB 16GB CF 700X Memory Card $89.99 The Delkin 16GB CF 700X memory card is designed to excel in DSLR cameras and advanced camcorders that require faster speeds and performance. With capabilities to write data at speeds over 67MB/s, the CF 700X series supports slow motion recording for professional film-making and promises not to drop frames or slow your cameras buffer, even in the most demanding shooting or recording scenarios. Unli… |
|
|
Spyderco Sage Titanium Plain Edge Knife $162.82 The first Sage knife recognized knifemaker Michael Walker’s creation of the LinerLock, which offered a ball-bearing detent method of keeping a folding knife closed. The Sage2 focuses on prime mover Chris Reeve’s embellishment of the original Walker LinerLock, which he morphed into the Reeve Integral Lock (RIL). The modification uses the handle scale as the lock’s liner. With the back portion of th… |
|
|
Columbia River Knife and Tool 5510 K.I.S.S. in the Dark 2.25-Inch Serrated Blade Knife, Gray $19.73 2.25 in. tantobo blade made from 3Cr13 51-53 HRC balde with a 3.5 in. stainless steel handle. Overall length is 5.75 in. Includes bead-blast finish pocket clip key ring hole and thumb stud. ATTRIBUTES Blade Detail: Tanto ComboEdge Blade Length (inches): 2.25 Blade Material: 420J2 Carry System: Pocket Clip Handle Material: 420J2 Lock Style:&nbs… |
|
|
Kershaw Scallion Frame Lock Knife $30.51 Kershaw’s Ken Onion Scallion offers high-performance styling and all the convenience of the SpeedSafe ambidextrous assisted opening system in a slightly larger knife. It’s ideal for everyday carrying. The blade is built of high-carbon 420HC stainless steel for good edge retention and excellent corrosion resistance. For lighter weight the Scallion series features anodized aluminum or polyimide hand… |
|
|
Texsport Padre Island Hammock Stand $67.50 Suitable for most one-person hammocks, this stand measures 136 inches x 40 inches x 45 inches high and is made of 1.25-inch-diameter tubular steel. Two plated S hooks come with the stand for hanging a hammock (not included). The stand is easy to set up, and assembly instructions are included…. |
|
|
CRKT Ashworth Turtle Knife, Ultramarine Scales Black titanium nitride finish frame 2″ closed linerlock. 3Cr13 stainless spear point pen blade. Stainless frame. Pocket/money clip. Integrated chain holder for attachment to key fob or neck chain. Can also be converted to a pendant by unscrewing money clip and attaching back handle scale (included). Designed by Boyd Ashworth…. |
|
|
United States Combat Veteran License Plate Frame (Chrome Metal) $15.99 This is a metal license plate frame that is chrome plated. Fits standard DMV 6 by 12 inch license plates. Great item for your car or truck…. |
|
|
Genuine Government Air Force Pilots Polarized Sunglasses – 52 millimeters $120.99 U.S. Made sunglasses by the #1 government supplier. Features include: 100% uv protection, grey lenses and bayonet temples. Carrying case included. Available the following frame colors: gold, black or chrome… |